Super Saber Specifications

The Super Saber belt cleaner is a segmented blade press fit on a square frame.

Super Saber Diagram
Notes:

  1. Hub with urethane bushing to absorb impact on tube.
  2. Max: Belt width plus 23" (584 mm).
  3. 2¼ x ¼" (51 x 6 mm) W square tube
    with 1½" (38 mm) Schedule 160 pipe welded into end.
  4. Blades are pressed onto a 3 x ¼" (76 x 6 mm) W square tube.
  5. ¼ x 6" (6 x 152 mm) square weld plate.
Dimensions:
  1. See table below
  2. See table below
  3. 13" (330 mm)
  4. 13.1" (333 mm)
  5. 11.1" (282 mm)

Belt Width A
(in)		 B
(in)		 Belt Width A
(mm)		 B
(mm)
18 in 17.48 22.48 457.2 mm 443.99 570.99
24 in 23.31 28.32 609.6 mm 592.07 719.33
30 in 29.18 34.18 762.0 mm 741.17 868.17
36 in 34.96 39.96 914.4 mm 887.98 1014.98
42 in 40.79 45.79 1066.8 mm 1036.07 1163.07
48 in 46.62 51.62 1219.2 mm 1184.15 1311.15
54 in 52.45 57.45 1371.6 mm 1332.23 1459.23
60 in 58.28 63.28 1524.0 mm 1480.31 1607.31
66 in 64.1 69.1 1676.4 mm 1628.14 1755.14
72 in 69.93 74.93 1828.8 mm 1776.22 1903.22
84 in 81.59 86.59 2133.6 mm 2072.39 2199.39
96 in 93.25 98.25 2438.4 mm 2368.55 2495.55

See also: Conveyor Belt Cleaners Engineering Specifications