Conveyor Dust Control: Dust Shark Specifications

Cross Section Along Center Line of Wash Box

1. Pressure Roller
2. Upper Spray Bar for V-Plow
3. Gordon V-Plow Conveyor Belt Cleaner
4. Squeegee Roller
5. Two Saber Secondary Conveyor Belt Cleaners
6. Lower Spray Bar sprays both belt and Saber Secondary Cleaners
7. Drain Pan
8. Drain Line

• Each Dust Shark is custom built to fit your existing structure. As a general guideline, the Dust Shark is 50 inches (1270 mm) long and will be 20 inches (508 mm) wider than the existing conveyor structure.
• Secondary Cleaners: One piece Gordon Saber blades.
  V-Plow Cleaner: One piece SBR rubber blade.
• Construction: A36 or equal carbon steel.
  Drain Pan: 304 Stainless Steel construction with 3 inch (76 mm) drain pipe.
• Control Box: 8 x 14 x 16 inch (203 x 356 x 406 mm) NEMA 4 120 V AC.
• Minimum water pressure is 60 PSI.
• Complete Stainless Steel construction is available.

Copyright ©2008
Arch Environmental Equipment, Inc.
All Rights Reserved.