Conveyor Dust Control: Dust Fogger Components

Dust Fogger Spray Heads

The cluster spray heads are equipped with the standard #3 nozzle. The number of nozzles depends upon the spray head required. A filter and ball valve may be added to the spray bar.

Mark 2 Dust Fogger Head for Conveyor Dust Control

Mark 2 Dust Fogger Head (FS-MK2)

7 nozzles
.5 gallons per minute at 100 psi

The original "Dust Fogger" used in limited applications when low water usage is a must, the Mark 2 is still a favorite of many in the aggregate/crushing industry.
Mark 3 Fogger Head for Conveyor Dust Control

Mark 3 Fogger Head (FS-MK3)

13 nozzles
1 gallon per minute at 100 psi

Comes complete with brass fittings, filter valve, and quick release camlock.
Mark 4 Fogger Head for Conveyor Dust Control

Mark 4 Fogger Head

9 nozzles
.7 gallon per minute at 100 psi

Designed to be expanded in a series from one head to another. Comes complete with brass fittings, filter valve, and quick release camlock.
Mark4 Dust Fogger System for Dust Suppression

Mark 4 Spray Head System

Dust Fogger Pumps

Booster Pump for Conveyor Dust Suppression Pumps are equipped with one filter, one ball valve, a pressure regulation valve, and pressure gauge. Motors are available in 120/240 or 230/460 voltage.

Part Numbers:
FS-AP75HP1PH3/4 HP 120/240 volts
FS-AP75HP3PH3/4 HP 230/460 volts
FS-AP1HP1PH1 HP 120/240 volts
FS-AP1HP3PH1 HP 230/460 volts
FS-AP2HP1PH2 HP 120/240 volts
FS-AP2HP3PH2 HP 230/460 volts
FS-AP3HP1PH3 HP 120/240 volts
FS-AP3HP3PH3 HP 230/460 volts

Dust Fogger Spray Bars

Mark 6 spray bars are equipped with spray nozzles spaced 6 inches from the end and every 12 inches thereafter. Therefore a 4 foot bar will have 4 spray nozzles.

Part Numbers:
FS-MK6-22 Foot Long Spray Bar
FS-MK6-33 Foot Long Spray Bar
FS-MK6-44 Foot Long Spray Bar
FS-MK6-55 Foot Long Spray Bar
FS-MK6-66 Foot Long Spray Bar
FS-MK6-77 Foot Long Spray Bar
FS-MK6-88 Foot Long Spray Bar
FS-MK6-99 Foot Long Spray Bar
FS-MK6-1010 Foot Long Spray Bar
To add a filter and ball valve to the spray bar, add "-S" to the part number shown above.

Dust Fogger Hoops and Custom Applications




Mark 6

Our most universal model, the
Mark 6 can be custom shaped in a
straight line, octagon, or square -- almost any configuration to fit your needs.

Made of tough Nylatron material, the Mark 6 is ideal for providing a "halo of fog" around your entire dust problem, including conveyor discharge areas, dump bins, and cement/fine dust material applications.

The list of uses is
truly endless.
  • Hoop material is priced by the foot, with 6" or 12" nozzle spacing:
    FS-MK6-H12 = 12"
    FS-MK6-H6 = 6"
  • Available in a kit or custom built.
  • Lightweight and easy to install.

Common Replacement Parts

3WS#3 replacement nozzle for MK6 bar
3NS#3 replacement nozzle for cluster spray head
FT100-3/4P100 mesh replacement filter screen for 3/4 inch strainer
FT200-3/4P200 mesh replacement filter screen for 3/4 inch strainer
CL-3/4ASet of 3/4 Aluminum Cam-Lok fittings
QC-1 /4BSet of 1/4 quick connect fittings for 3/8 connection
G-200PSI200 psi pressure gauge with 3/8 npt connection
PRVPressure regulating valve with 3/4 npt connection